3 Things that Can Cause Summertime Mold and Our Top Tips to Prevent it

50

Seriously, mold in the summer? That’s right, in fact, most homeowners have problems with mold growth in the summertime. Below, are some of the most common things that can cause summertime mold and how you can prevent it?

Importance of Mold Prevention

Mold isn’t just a gross fungus that can not only damage your home but is a serious health hazard as well. Plus, black mold can make your allergy symptoms even worse. According to UtahFloodCleanup.com, mold mycotoxins can, in some cases, create incurable illnesses. However, people in the summer can suffer from respiratory issues due to mold spores in the air.

Three Common Mold-Makers

  1. Sprinklers

Sprinklers can cause water to pool up around your home’s foundation, which can seep into your basement or your home’s foundation, causing mold to grow. However, this can weaken your home’s foundation at the same time, which can be dangerous for you and your family.

  1. Swamp Coolers

Evaporative coolers, otherwise known as swamp coolers, are an eco-friendly, cheaper alternative to central AC. However, these coolers work best when they operate in an open window, rather than AC which requires a closed off room. At the same time, this evaporative cooling naturally creates humid, dry air. When this happens, it can cause the cooler to rust and occasionally leak, which can create mold.

  1. Blocked Gutters

Sure, your gutters are great for dispersing rain from your house, but what happens when it’s blocked up. That’s right, it influences mold growth, which can end up breaking your gutters.

How To Prevent Summertime Mold

-Make sure your home is cool during the warmer months. Mold thrives in temperatures 77 degrees Fahrenheit and above.

-Double check your air conditioner’s cooling capacity to make sure it is not too high. Larger ac unit has diminished dehumidification ability. Often with these units, the air in the room cools so quickly that the unit turns off before the area dehumidifies. If the humidity in your home is around 60 percent or above, you AC is not dehumidifying your home properly. This also means that mold will grow much more rapidly. Tackle this issue to reduce the moisture in your home and limit any mold growth.

-Make sure your bathroom stays as dry as possible. Never install carpeting in your bathroom as it retains a lot of moisture. Instead, use small throw rugs that can be washed and dried frequently. Also, after you take a shower or bath, open a window or turn on the exhaust fan. This will get rid of the steam and prevent it from humidifying your home.

Utilize your exhaust fans not just in your bathroom but in other areas as well. Turn on the stovetop fan after cooking as this also produces humidity. You should also ensure that your clothes dryer exhaust air goes straight outdoors.

Declutter your basement and attic from any material that can get damp and end up becoming a nesting spot for mold.

Get rid of visible mold as soon as possible. Just because you have mold doesn’t mean you can’t get rid of it. You need to immediately get rid of mold that’s either embedded in your floors, ceilings, or walls. If need be, you should consult a professional for quick mold removal.

-Make sure that you clean up any wet spots or repair any leaks in your home. It only takes 48 hours for a wet area to become ripe with mold. To avoid this, avoid having an active collection of moisture of mildew in your home.

You might also like More from author